Sorry, now sold
This is a Myford Super 7 lathe serial number SK94102 which dates the year of manufacture to between 1968 and 1971. It is fitted with a screwcutting gearbox serial number QC92981. There is also a thread dial indicator fitted to the carriage, and a Myford Part No. 1410 tool holder fitted to the top slide.
It has a Newton Tesla CL750 speed control unit with forward and reverse plus jog, enabling the speed and direction of the spindle to be easily controlled, all powered via a standard single phase 240V supply.
It has brand new vee belts on the primary drive motor to countershaft and secondary drive countershaft to headstock, plus a new wiper felt and front head stock lubricating wick.
Also included are the following items ….
- 4″ Pratt Burnerd 1580-01005 with inside jaws plus chuck key
- 2MT drill chuck plus key for use in tailstock
- 2MT dead centre
- 2MT to 1MT adaptor sleeve
- 1/8″, 3/16″ ,1/4″ ,3/8″ ,1/2″ collets for use in spindle
- collet nose piece
- collet closing tube
- spanner to lock top slide nuts
- Operating, installation and maintenance manual
- Myford sales leaflet
The gearbox has been drained of oil, ready for shipping. It will need to be refilled as part of commissioning this lathe in your workshop.
Note that there is a small dink to the left hand end of the lathe bed. There is also a strengthening strap inside the rear of the gear cover mounting plate as there is a small split to the plate in that location. These areas can be checked in the relevant photos.
Shipping to Great Britain mainland areas (excluding Highland / remote postcodes) is available via a pallet. I can also ship to NI although the shipping cost will be higher to reflect the additional transport cost.
A short video of this lathe can be seen here, and further pictures are in the two photo galleries below.