Sorry, now sold
This is a Myford ML10 lathe with the serial number V117558 which dates the year of manufacture to around 1974.
It is powered by a 250W single phase 240V motor by Brook Crompton Parkinson Motors, and there is a Myford switch unit allowing forward and reverse operation of the motor.
The lathe is mounted on the stand supplied by Myford for use with ML10 lathes. It also has brand new v-belts fitted to the primary and secondary drives.
The micrometer dials to the cross slide and top slide are numbered 0 to 90, indicating that they provide imperial measurements.
Also included are the following accessories ..
- Myford / Toolmex 100mm 3 jaw self centering chuck with matched inside and outside jaws
- 2MT drill chuck for use in the tailstock
- 2MT live centre for use in the tailstock
- 2 x 2MT dead centres
- selection of change gears
- ML10 faceplate
- Myford small angle plate
Collection in person of this item is available. Alternatively, shipping to GB non-remote postcodes with Monday to Friday anytime delivery is available for the price given in the listing. If shipping to Highland/Remote/NI postcodes is required or Saturday or AM / PM delivery, please contact me for the additional cost. The item will be bolted onto a pallet for delivery, note that I may need to remove the lathe body from the stand to securely load it onto the pallet.
Further information can be seen in the following video and the photo gallery below.
