Sorry, now sold
This is a Weiss E2 direct drive milling machine fitted with DRO and mounted on a stand.
The makers plate on the rear of the column bears the serial number 19001 and a date of 10.2019.
It looks pretty much identical to the item that Amadeal sell as their item AMA-MI-E2R8MET, additionally this item has the stand (Amadeal item AMA-ST-E2WE) plus the DRO (which also pictured on the Amadeal website, it doesn’t look like they sell it ).
The spec of the E2 mill taken from the Weiss website is as follows ….
- Max. drilling capacity: 25mm
- Max. end milling capacity: 16 mm
- Max. face milling capacity: 63 mm
- Table size: 700×180 mm
- Table travel (X,Y): 485×140 mm
- T-slot: 3×12 mm
- Spindle stroke: 75 mm
- Step of spindle speeds: Variable
- Range of spindle speeds: 100-2250 rpm
- Spindle incline angle: ±90°
- Distance from spindle to column: 160 mm
- Distance from spindle nose to table: 370 mm
- Motor:
- Input- 1.1KW
- Output- 900W
- Net weight: 128kg
This item accepts MT3 tooling with an M12 drawbar thread. The following accessories are included
- ER32 collet holder, with spanner and 12mm collet
- Drill chuck holder with key
- Face mill and spare cutters
- Selection of milling cutters
- Selection of milling clamps
- Various spanners etc
Shipping to GB non-remote postcodes with Monday to Friday anytime delivery is available for the price given in the listing. If shipping to Highland/Remote/NI postcodes is required or Saturday or AM / PM delivery, please contact me for the additional cost. The mill will be separated from the stand and both will be bolted onto a pallet for delivery.
Further information can be seen in the following video and the photo gallery below.
