Chester Super Lux milling machine with 3 axis DRO and power feed to table

Sorry, now sold

Chester Super Lux milling machine

Fitted with 2 axis DRO with remote head to x & y horizontal motion of the table, plus linear scale DRO fitted to the fine feed of the vertical movement.
Fitted with 750W single phase motor, plus power elevation to move the head up and down.

Also with table power feed unit and transformer.
Spindle is MT3 with M12 drawbar. There are the following items for use with the mill

  • drill chuck
  • face mill
  • mill chuck with 4 collets

Please take a look at the spec on the chester hobby store website to see the specification of the current version of this item – the dimensions of this item are pretty similar. If there is any particular part of the spec you want me to check, please message me.

This is a heavy item, the mill body is approx 300kg.

Further photos are in the gallery below – the purchaser of this item requested that it was stripped down for delivery, as can be seen in some of the later pictures.