Sorry, now sold
This is a Myford Super 7 lathe with induction hardened bedways bearing the serial SK163942 which dates the year of manufacture to be between 1988 and 1991. Power cross feed is fitted as standard to this lathe. The serial number of the gearbox is QC164846. There is also a thread dial indicator fitted to the carriage.
It has a Tyco / Crompton Motors 550W, 1425RPM, 240V motor with a Myford control switch allowing forward / reverse operation.
It has brand new vee belts on the primary drive motor to countershaft and secondary drive countershaft to headstock, plus a new wiper felt.
Also included are the following accessories …
- 4″ Pratt Burnerd 1588-10130 3 Jaw self centering chuck with matched inside and outside jaws, plus chuck key
- 4 1/2″ Myford V1106 catch plate
- 7″ face plate
- Drill chuck with MT2 mount plus key
- MT2 live centre
- MT2 dead centre
- Angle plate
- Small spanner for the top slide rotation locking nuts
Note that the gearbox has been drained of oil, ready for shipping. It will need to be refilled as part of commissioning this lathe in your workshop.
Shipping to Great Britain mainland areas (excluding Highland / remote postcodes) is available via a pallet.
A short video of this lathe can be seen here, and further pictures are in the two photo galleries below.
