Myford Super 7 lathe SK163802 with quick change gearbox and power crossfeed

Deposit taken

This is a Myford Super 7 lathe bearing the serial number SK163802 which dates the year of manufacture to approximately 1985. It has power cross feed, a quick change gearbox and an induction hardened bed. There is also a screw cutting dial indicator fitted.

It is fitted with a 240V single phase 550W 1425 RPM Crompton Greaves motor with a switch to provide either forward or reverse rotation of the spindle.

It has new vee belts on the primary drive motor to countershaft and secondary drive countershaft to headstock, plus a new spindle lubrication wick and wiper felt has been fitted.

The micrometer dials to the cross slide and top slide are numbered 0 to 90, indicating that they provide imperial measurements.

Also included are the following items…

  • 4″ self centering 3 jaw chuck with matched inside and outside jaws, plus chuck key
  • Dickson tool post plus 4 tool holders, 1 bar holder and 1 parting tool holder, plus locking key
  • Faceplate
  • Catch plate & dogs
  • 2MT Jacobs drill chuck for use in the tailstock
  • 2MT dead centre
  • 2MT live centre

Note that the quick change gearbox has been drained of oil so that it can be shipped, so it will need to be refilled with K68 oil as part of commissioning this lathe in your workshop.

Collection in person of this item is available. Alternatively, shipping to GB non-remote postcodes with Monday to Friday anytime delivery is available for the price given in the listing. If shipping to Highland/Remote/NI postcodes is required or Saturday or AM / PM delivery, please contact me for the additional cost. The item will be bolted onto a pallet for delivery.

Further information can be seen in the following video and the two photo galleries below.