For sale: price on application

This is an Astoba UW1 Model K machine with accessories enabling it to be configured as a centre lathe, facing lathe, horizontal borer, vertical miller and drill.
It bears the serial number 251 which means it probably dates to the late 1940’s.
More information about this type of machines can be found on Tony Griffiths excellent machine archive here.
This machine is powered by a more recent 3 phase motor operated via a variable frequency inverter, allowing operation from a standard 240V supply. If you have a type AC RCD unit on your consumer board, some units are ultra sensitive when used with a 3 phase frequency inverter, so you might need to swap it to a type A, B or F RCD. The controls of the inverter have been extended to the machine with a forward / reverse switch and variable spindle speed controller. Additional operating speed ranges can be set by moving the belt to different locations on the pulley cones – note there are a couple of chips to the spindle pulley cone.
The machine comes with the following accessories
- 3 jaw chucks mounted for use on the spindle
- 4 jaw chuck mounted for use on the spindle
- 12″ faceplate
- small faceplate with 4 jaw fixing – note there is an area where the casting has chipped
- catch plate
- quick change tool post with 2 holders – note if additional holders cannot be sourced, a new tool post and holders might be required
- Arm support assembly for horizontal boring
- 1MT spindle and operating lever for drilling operation
- top slide that mounts on the slotted table for lathe operation
- horizontal slotted table that mounts on the slotted table for milling / drilling operation
- milling vice that mounts on a slotted table
- rotary table with thread mount for chuck. Note there are no dividing plates
- large selection of collets for use in the spindle plus drawbar
- large selection of accessories that mount in the spindle with the drawbar eg centres, 1MT adapators, nose protectors etc
- large selection of 1MT, 2MT and 3MT accessories eg drill chucks, sleeves etc
Please review the photos and watch the video below to assess the condition of this machine
Collection in person of this machine is available, you will need a large hi-top transit van or similar so as to provide sufficient lifting clearance to load it. I can assist with loading using a 2T engine crane, you will need similar to unload.
Alternatively, shipping to GB non-remote postcodes with Monday to Friday anytime delivery is available for the price given in the listing. If shipping to Highland/Remote/NI postcodes is required or Saturday or AM / PM delivery, please contact me for the additional cost. The machine will be bolted onto a pallet for delivery
