For sale: £3485 plus £190 delivery
This is a Myford Super 7 lathe bearing the serial number SK153016 which dates the year of manufacture to the later part of the date range 1979 to 1985. Power cross feed is fitted as standard to this lathe. The serial number of the quick change gearbox is QC152396.
The micrometer dials to the cross slide and top slide are imperial, as is the leadscrew handle and rule markings to the tailstock spindle barrel. There is also a screw cutting dial indicator fitted.
The lathe is mounted on a Myford industrial stand with riser blocks. It is fitted with a 1425RPM single phase 240V Brook Crompton Parkinson motor, with forward and reverse operation via the switch panel in the stand.
It has brand new vee belts on the primary drive motor to countershaft and secondary drive countershaft to headstock, plus a new spindle wick and wiper felt.
Also included are the following accessories….
- 3 jaw self centering Pratt Burnerd 1588-10130 chuck with inside and outside jaws, plus chuck key
- 4 1/2″ Myford V1106 catch plate
- 7″ face plate
- Myford four tool turret 1410 tool post
- Drill chuck with MT2 mount for use in the tailstock
- MT2 dead centre
- Manual and operation handbook
Note that the gearbox has been drained of oil, ready for shipping. It will need to be refilled as part of commissioning this lathe in your workshop.
Collection in person of this lathe is available. Alternatively, shipping to GB non-remote postcodes with Monday to Friday anytime delivery is available for the price given in the listing. If shipping to Highland/Remote/NI postcodes is required or Saturday or AM / PM delivery, please contact me for the additional cost. The item will be bolted onto a pallet for delivery. As the stand is 123 cm long it is unfortunately slightly longer than a standard pallet, hence for the higher delivery charge for an oversize pallet delivery
Further information can be seen in the following video and the two photo galleries below.
